Brand Name : LuoLe
Certification : CE
Place of Origin : Wuxi
MOQ : 1 set
Price : discuss in letter
Payment Terms : T/T
Packaging Details : with bubble paper
Working Speed : 12 Meters / Min
Forming station : 20
C & Z Profile Roll Forming Machine Use Automatic Change Purlin Width and C Z Exchange with Each Other
Machine overview
C & Z purlin roll forming machine is one of the basic machine in the welding fields. It was widely used in the Standard Steel plant and simple steel house. Especially the hydraulic power system’s using makes it faster than other ordinary machines.This C purlin roll forming machine consists of hydraulic decoiler, straightening and roll forming M/C,PLC control system, hydraulic pressing&cutting, and production stand.
Simple introduction of this machine
Details of Z purlin roll forming machine
Item | Description |
Material of roller : | GCr15,quenched |
Material of shaft : | 45#forge steel |
Material of punching mold : | Cr12 HRC 58-62 |
Material of cutting blade : | CR12with heat treatment |
Main power : | 15KW |
Hydraulic power : | 7.5KW |
Working speed : | 15m/min(not include cutting and punching) |
Forming stations : | 18 stations |
Control system : | PLC Panasonic |
Transmission : | By gearbox |
Automaticity : | Semi-Automatic/Automatic |
Main dimension(L,W,H) : | 11000mm*1400mm*1400mm |
Total weight : | 14000KG |
Main parts of Z purlin roll forming machine
NO. | Name | Unit | Qty |
1 | Roll Forming Main Machine | Set | 1 |
2 | Hydraulic/Manual decoiler | Set | 1 |
3 | PLC Control System | Set | 1 |
4 | Hydraulic Punching Device | Set | 1 |
5 | Hydraulic Cutting Device | Set | 1 |
6 | Hydraulic Station | Set | 1 |
7 | Manual Out Table | Set | 2 |
Details of main parts
Name | Describe |
Control panel (PLC Panasonic) | The machine will automatically cut to length and stop when requiredquantity is achieved. |
Control panel:button-type switch and touch screen | |
The program should be can set 5 different measure and quantity. | |
Tolerance of length: 3m+/- 1.5mm | |
Voltage,Frequency,phase:415V,50HZ,3Phase | |
Punching and cutting device | Punching with hydraulic drive |
Punching in longitude wise controlled by PLC | |
Punching at horizontal wise adjusted by manual hand wheel | |
Hydraulic Cutting before forming: Cut the sheet before roll forming to required length. | |
Cutting motion: The main machine automatically doesn't stop and the continue punching and cutting. | |
Hydraulic decoiler
| Hydraulic coiler car adopt motor advance (power:3KW, hydraulic up and down:12MPA) |
Single head to put the coil hydraulic flow over device. | |
Coil spec:Φ508×1300mm | |
Flow over range:Φ460-520mm | |
Oil cylinder:Φ160×90mm | |
Transmission:drive by hydraulic brake | |
Load bearing:5T,10T,20T |
Automatic 18 Stations C Z Profile Roll Forming Machine Material Thickness 1.5-3mm Images |